| Concept & design | Subwoofer ASP | Supplies | PLUTO | 

Supplies for building the PLUTO subwoofer

Some items for building the subwoofers can be bought from LINKWITZ LAB, like the two blank printed circuit boards with material list and loading chart, or the fully assembled and packaged crossover/equalizer electronics. Everything else is a DIY project. Some unfinished wooden cabinet parts may be offered by Wood Artistry in the future but probably not a complete PLUTO or PLUTO+. Unlike for the ORION there is not enough value that WA can add to justify the necessary increase in cost to you. Without such increase it would not be a worthwhile product for them. Thus, if you need help, try to find a friend who is willing to lend you a hand. He/she might build a system for themselves at the same time. Your license to do this is the purchase of a set of PLUTO construction plans for each builder. I guarantee that you will have to look long and hard to find a commercial loudspeaker that comes even close to the PLUTO+. I say this with some embarrassment in light of my previous efforts in designing speakers. PLUTO+ is not an accident, but its performance far exceeded my expectations. 

The table gives material cost estimates for building a pair of subwoofers yourself.

------------------------------------------------------------------------------------------------------------------------------

The w-ASP printed circuit board makes building the electronics easy. The locations of all components are labeled on the pcb and in the supplied material list. So it is a simple matching operation to insert and then to solder the components from the backside of the sturdy pcb. The cost of one w-ASP pcb is $25    Inventory Sale!.  It includes the PLUTO+ material list.  For shipping add $10, US or international, for up to 6 boards.

---------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------

Ordering information 

Send an e-mail message with the subject "PLUTO subwoofer order" to tell me the details of your order and to provide me with shipping information.
Copy the example below between the dashed lines into an e-mail message to info@magicLX521.com and correct the underlined text . 
(Drag your mouse over the text to highlight it, then COPY and PASTE into your e-mail message) 

==========================================

==========================================

Payment options

You can pay with credit card over the Internet by using PayPal. In that case, please add a 3% payment fee (4% international) to the total cost of materials and shipping. My address for PayPal is: info@magicLX521.com

    | Concept & design | Subwoofer ASP | Supplies | PLUTO |